1984 300D

Front End Rebuild

Looking to get 2 inch lift using heavy duty springs (made in Sweden) and coil spring shims; 19mm front and 23mm rear. (made in Germany)

2 x Lower control arm ball joint – 1163330927

1 x Upper control arm assembly, LEFT – 1233304607

1 x Upper control arm assembly RIGHT – 1233304707

4 x Upper control arm bushings – 1163336314 (only needed if upper control arms do not include bushings)

4 x Sway bar bushing @ upper control arm – 1163334014

2 x Guide rod joint – 1233301335

2 x Guide rod to control arm bushing – 1233301475

2 x Lower control arm bushing set, inner, W123 style 1233301375 OR 2 x Lower control arm bushing set, inner, W126 style (considered an HD upgrade) – 1263300075

2 x Front Shock absorber – 1233200030 Bilstein Comfort (I don't have the HD part number in front of me)

2 x Front spring – 1233214104

2 x Front sway bar bushing – 1233230585

1 x Drag link - 1234601505

2 x Tie-rods - 1233301803

1 x Steering damper - 0004635132

1 x Idler arm kit - 1264600819

2 x spring shims, I used 19mm front and 23mm rear.